COMPACTORS

CM-2 Stationary Compactor

Custom Manufacturing’s commitment to quality is best demonstrated by the durability of the product we manufacture. We do not mass produce our products. All containers are built to our customers specification and satisfaction. All of our hinges, latches, nose rollers, wheels and axles are made in our shop, not purchased from overseas. Our containers are American made, 100%.

Custom Manufacturing’s CM-2 Stationary Compactors are the most common type used in industrial installations. In this type the compactor remains "stationary" (bolted to the ground), and the Receiver Container (packer box) is detached from it, winched up onto the "roll-off truck", and hauled away to the local refuse dump, and emptied. It is then, brought back to the compactor and re-attached. Using this method, the maximum amount of trash can be hauled away for each trip.

Model CM-2........2 Cubic Yard Stationary Compactor

%Reduces storage and transportation cost significantly

%Large 35" X 56" Clear top opening

%Hydraulics plumbed to both sides of container

%Compact waste onsite

Compare a Custom Stationary unit with any other unit on the market, and you will quickly discover the structural integrity, quality, dependability and serviceability.

Remote Power Unit with Standard Control box is separate from the compactor / container, this allows it to remain free of damage caused during hauling to and from disposal sites and free of problems caused by landfill dust. There are no electrical connections to "make" or "break".

CM-2 Stationary Compactor

Standard Features                                       

   

  • Ram:                                                                
    Face Plate ½"
    Floor Plate ½"
    Side Plate 1/4"
    Top Plate 1/4"

  • Frame:
    Floor 1/2"
    Side Plates 1/4"
    reaker Bar 6" X 4" X 3/8" and tube with breaker bar teeth

            O   (2) 4 X 44 Cylinders with 2 1/2" Rod

  • Power Unit Weather Cover / Safety Panels
  • PLC Controlled
  • 20' Remote
  • Oil-Suitable for Wide Temperature Range
  • Monitor Gauge (Advance/Full Load Indicator)
  • Provisions for Disconnect on Left and Right
  • Oil Spill Pan Under Both Disconnects
  • 3/4 Full Light
  • 100% Full Light
  • UL Listed Electrical Components
  • User programmable number of strokes and stop position
    •

    Rating Data

    %Model Number CM-2
    %Rated Size 1.68 Cubic Yards
    %Clear Top Opening Length 36" / Width 56"
    %Ram Penetration 9 Inches
    %Chamber Length Length 41.5" / Width 60"
    %    Ram Face W-59.75" / H-28" / Area 11.6 Sq Ft.
    %Cylinder Stroke 44 inches
    %Bore/Rod Size 4.0 " / 2.5"
    %Discharge Opening Width 61" / Height 41.5"
    %Cycle Time (seconds) 40 Seconds
    %System Pressure Normal 1850 PSIG/ Max 2300 PSIG
    %Force Rating Normal 40,265 lbs. / Max 50,059 lbs
    %Rated Motor 100% Duty Cycle 3 Phase 240/480 Volt
    %Rated Motor 10 Horse Power/1725 RPM
    %Volume Displacement 144 cubic yards per hour
    %Pump 10 GPM Fixed Displacement

    • CM-2P Portable Compactor

    Custom Manufacturing’s commitment to quality is best demonstrated by the durability of the product we manufacture. We do not mass produce our products. All containers are built to our customers specification and satisfaction. All or our hinges, latches, nose rollers, wheels and axles are made in our shop, not purchased from overseas. Our containers are American made, 100%

    I n t e g r i t y Q u a l i t y T r a d i t i o n S u p e r i o r i t y

    Custom Manufacturing’s CM-2P Portable Compactors are designed to collect any excess liquid, to service hotels, restaurants, hospitals, shopping malls, or any place that may have liquid garbage in their waste. Our portable compactor is manufactured with a unitized body construction where the compactor head is welded to the receiver container, both of which are welded to a common platform base, which is designed to hold liquid. In addition it is easier to minimize and control odors and insects that may emanate from the compacted waste . For dumping, disconnect the power unit and remove the container, thus allowing the entire portable compactor to be hauled and then dumped. This allows the waste area to remain clean and sanitary. Each compactor can be customized with a variety of loading arrangements suited to fit your needs

    BENEFITS:

    Safely stores waste in a liquid tight container providing the benefits of odor and insect control, prevent contamination of work areas
    Every unit is factory tested for water tightness
    Compact waste onsite, reducing storage and reduce hauling cost
    (2) Container Inspections/Fire Hose ports on each unit
    Versatility-same parts, portable and stationary
    Ratchet locking system and grease fittings on all moving parts (hinges, latch, nose rollers, ground rollers)
    Plumbed to both sides for customer convenience and flexibility, durable construction
    Oil spill pan is positioned under the hydraulic quick disconnects to maintain a clean, safe work area.
    Coal Tar Epoxy on interior floor of container preventing rust and corrosion
    Also available in Rectangular Style
    Customized designs available, including space saving narrow or short container construction

    STANDARD COMPACTOR FEATURES

  • Frame: Floor ½"                                                  & Removable Access Panels

  • Side Plates 1/4"                                                 & Weather-hood / Safety Panels

  • Breaker Bar 6" x 4" x 3/8"                                    & Full seal with adjustable Hinges

  • tube with breaker bar teeth                                   & Pressure & Timer Actuated (no limit switches)

  • Ram: Face Plate ½"                                            & Reservoir: 20 Gallon Capacity

  • Floor Plate ½"                                                     & Oil-Suitable for Wide Temperature Range

  • Side Plates 1/4"                                                  & Pump: 9 GPM–10 HP motor

  • Top Plate 1/4"                                                     & Fixed displacement            

  • 20' Remote                                                         & UL Listed Electrical Components

  • 4 Wheels w/Grease Fittings                                 & 3/4 Full Light

  • Self-Cleaning compactor sump (sub-                     & 100% Full Light

  • floor) to prevent debris buildup behind ram             & Double End Pick-Up

  • Gasket used in rear door providing superior           & Hydraulics plumbed to

  • resistance to oils and chemicals. both sides of container.

    •

     

     

     

  • SPECIFICATIONS

  • (2) 4" X 44" Cylinder w/ 2 ½" Rod

  • Compactor Capacity (Cu. Yds.)             2

    •

  • Cycle Time (Seconds)                          40

    •

  • Cubic Yard Capacity                            20 -35

  • Capacity Per Hour (Cu. Yds.)                144

    •

  • Clear To Opening (Inches)                   L 36 x W 56

    •

  • Ram Penetration (Inches)                     9

    •

  • Ram Face Dimensions (Inches)             59 3/4 x 28

    •

  • Packing Force (Lbs.)

    •                 Normal 25,000
                    Maximum 37,000

     

    Information Request Form

    Select the items that apply, and then let us know how to contact you.

    Send product literature
    Send company literature
    Have a salesperson contact me

    Name
    Title
    Company
    Address
    E-mail
    Phone