|
SLUDGE CONTAINERS
  
Sludge Container
Water Tight Container Specialty Container
Sludge Containers are manuf.
Water Tight Containers are Specialty
Containers are mfg.
for Collecting, Storing and manufactured for
collecting to meet our customers
specific
Transporting a wide variety storing, and transporting a needs.
of sludges. wide variety of wastes cont.
excess liquids.
STANDARD FEATURES
Bulkhead/door/walls/floors........3/16" HR Sheet
Header...................................4" X 4" X 1/4"
Main Rails...............................6" X 2" X 1/4" Structural Tube
Solid Bar Rail Butts..................1 1/4" HR Plate
Crossmembers.........................On 18" centers
Pull Plate................................3/4" HR Plt
Pull Hook................................1 1/4" GD 50
Gussets..................................(2) Bussets on every other crossmember
Rear Wheels............................(2) 8" with 1 7/8" CR Axles
Axles/Hinges...........................All axles & hinges have zerk grease
Bulkhead Vertical.....................Tube 4 X 2 X 3/16 structural tube
Rear Door Gasket.....................1 X 2 Closed Cell
Primer.....................................Red Oxide
Paint Color...............................Per Customer Request
Manifest Box............................(Aluminum/water-tight)
Placard Mounting......................Plates (4)
OPTIONAL ACCESSORIES:
Rear Header Assembly for side hinge box
Front Header
Tarp Assembly
Adjustable Crossbows w/Mounting Sleeves
Roll Top Lid Assembly
Over Under Lid Assembly
OPTIONAL UNDERSTRUCTURE:
Front Wheels
Heil Dead Lift
Dempster
Swaploader
Ampliroll
Stellar
SIZE A
B C
D
10YD 40" 53"
96" 13'4"
20YD 45" 58"
96" 23'6"
25YD 55" 68"
96" 23'6"
30YD 65" 78"
96" 23'6"
SPECIAL SIZES AND OPTIONS AVAILABLE UPON REQUEST
WATER-TIGHT CONTAINERS
STANDARD FEATURES
Bulkhead & Doors.....................10 Ga. HR Sheet
Sidewall & Floors......................3/16 HR Plate
Main Rails...............................6" X 2" X 1/4" Structural Tube
Solid Bar Rail Butts..................1 1/4" HR Plate
Crossmembers.........................On 18" centers
Pull Plate................................3/4" HR Plt
Pull Hook................................1 1/4" GD 50
Gussets..................................(2) Bussets on every other crossmember
Rear Wheels............................(2) 8" with 1 7/8" CR Axles
Axles/Hinges...........................All axles & hinges have zerk grease
Bulkhead Vertical.....................Tube 4 X 2 X 3/16 structural tube
Rear Door Gasket.....................1 X 2 Closed Cell Water Tested
Latch/Hinge.............................Adjustable, draw-tight w/ratchet
operated wedge assembly, insuring a seal
Primer.....................................Red Oxide
Paint Color...............................Per Customer Request
Manifest Box............................(Aluminum/water-tight)
OPTIONAL ACCESSORIES:
Front Wheels
Manifest Box (Aluminum/water-tight)
Placard Mounting Plates (4)
Rear Header Assy (splash plate)
Front Header
Tarp Assembly
Adjustable Crossbows w/Mounting Sleeves
Roll Top Lid Assembly
Over Under Lid Assembly
Coal Tar Epoxy Interior
OPTIONAL UNDERSTRUCTURE:
Front Wheels
Heil Dead Lift
Dempster
Swaploader
Ampliroll
Stellar
Pal-Lift
SIZE A
B C
D
20YD 45" 58"
96" 13'4"
25YD 55" 68"
96" 23'6"
30YD 65" 78"
96" 23'6"
SPECIAL SIZES AND OPTIONS AVAILABLE UPON REQUEST
| .jpg)
.jpg)
