|
| |
Portable Compactors
CM-230P, CM-235P Compactor
Custom Manufacturing’s commitment to quality is best
demonstrated by the durability of the product we manufacture. We do not mass
produce our products. All containers are built to our customers specification
and satisfaction. All or our hinges, latches, nose rollers, wheels and axles are
made in our shop, not purchased from overseas. Our containers are American made,
100%
  .jpg)
I n t e g r i t y Q u a l i t y T r a d i t i
o n S u p e r i o r i t y
Custom Manufacturing’s
Portable Compactors are designed to
collect any excess liquid, to service hotels, restaurants, hospitals, shopping
malls, or any place that may have liquid garbage in their waste. Our portable
compactor is manufactured with a unitized body construction where the compactor
head is welded to the receiver container, both of which are welded to a common
platform base, which is designed to hold liquid. In addition it is easier to
minimize and control odors and insects that may emanate from the compacted waste
. For dumping, disconnect the power unit and remove the container, thus allowing
the entire portable compactor to be hauled and then dumped. This allows the
waste area to remain clean and sanitary. Each compactor can be customized with a
variety of loading arrangements suited to fit your needs
BENEFITS:
Safely stores waste in a liquid tight container providing
the benefits of odor and insect control, prevent contamination of work areas
Every unit is factory tested for water
tightness
Compact waste onsite,
reducing storage and reduce hauling cost
(2) Container Inspections/Fire Hose ports
on each unit
Versatility-same parts, portable and stationary
Ratchet locking system and grease fittings on all
moving parts (hinges, latch, nose rollers, ground rollers)
Plumbed to both sides for customer
convenience and flexibility, durable construction
Oil spill pan is positioned under the
hydraulic quick disconnects to maintain a clean, safe work
area.
Coal Tar Epoxy on interior floor of container
preventing rust and corrosion
Also available in Rectangular Style
Customized designs available, including space
saving narrow or short container construction
STANDARD COMPACTOR FEATURES
Frame: Floor
½"
&
Removable
Access
Panels
Side Plates
1/4"
&
Weather-hood
/ Safety
Panels
Breaker Bar
6" x 4" x
3/8"
&
Full seal
with
adjustable
Hinges
tube with
breaker bar
teeth
&
Pressure &
Timer
Actuated (no
limit
switches)
Ram: Face
Plate ½"
&
Reservoir:
20 Gallon
Capacity
Floor Plate
½"
&
Oil-Suitable
for Wide
Temperature
Range
Side Plates
1/4"
&
Pump: 9 GPM–10 HP
motor
Top Plate 1/4"
& Fixed displacement
20' Remote
&
UL Listed
Electrical
Components
4 Wheels
w/Grease
Fittings
&
3/4 Full
Light
Self-Cleaning
compactor
sump (sub-
&
100% Full
Light
floor) to
prevent
debris
buildup
behind ram
&
Double End
Pick-Up
Gasket used
in rear door
providing
superior
&
Hydraulics
plumbed to
resistance
to oils and
chemicals.
both sides
of
container.
Rams are lubricated with water resistant
mystic hydraulic grease
 
 
 
 
SPECIFICATIONS
(2) 4" X 44" Cylinder w/ 2 ½" Rod
Compactor Capacity (Cu. Yds.)
2
Cycle Time (Seconds) 40
Cubic Yard Capacity 20 -35
Capacity Per Hour (Cu. Yds.) 144
Clear To Opening (Inches) L 36 x W 56
Ram Penetration (Inches) 9
Ram Face Dimensions (Inches) 59 3/4 x 28
Packing Force (Lbs.)
Normal 25,000
Maximum 37,000
| |
|
.jpg)
.jpg)
